HLDC-2400-8S Circular Loom

Equipment model: HLDC-2400-8S

Host speed: 80r/min (the number of shuttles is 640 times/min)

Host power: 5.5KW (frequency conversion and speed regulation)

Number of shuttles: 8 shuttles (aluminum wheeled shuttles)

Track width: 130mm (replaceable dovetail groove)

Production width: 1900mm-2300mm

Weft density: 8-15 strips/inch (adjustable frequency conversion and lifting)

Production speed: 64m/h-119m/h (theoretical production capacity, actual production capacity is generally calculated based on 85% start-up rate)

Counting code meter: photoelectric meter

Number of warp yarns: maximum 2880

Warp diameter: maximum 140mm

Weft diameter: maximum 105mm

Warp delivery device: automatic warp delivery (using dual frequency converters to automatically track the warp delivery)

Breaking control: automatic shutdown after breaking and finishing the warp

Weft breaking control: Bluetooth type weft control, automatic shutdown device for weft breaking and weft completion

Sand table diameter: according to customer requirements

Winder: one, direct-connected reducer with worm gear (frequency converter automatically tracks the winder)

Winding width: 2400mm

Winding diameter: maximum 1200mm

Equipment size: (L) 15.8mX (W) 3.71mX (H) 4.95m

Equipment weight: about 6.3T

Equipment features：

1. This machine is controlled by 5 frequency converters (6 frequency converters are used for dual winders), frequency conversion for warp delivery, frequency conversion for winding, and frequency conversion for cloth lifting (controlled by dual encoders, shutdown and start-up without dilute weft) to make the woven fabric surface of the equipment smoother.

2. This machine adopts double-row jump rods, which are controlled by warp breaking and completion, and the number of warp yarns can reach 2880. It can weave high-density and high-fiber container bags and geotextiles.

3. Bluetooth-type weft detector, sensitive and reliable, not affected by dust and light, safe and reliable, automatic shutdown of weft breaking and weft completion, and low defective product rate.

4. The equipment structure is reasonable and simple, with high operating reliability, few wearing parts, easy maintenance and low maintenance costs.

5. This machine adopts flat cam, oil-free lubrication, low noise, energy saving and environmental protection.

6. Using frequency conversion and speed regulation, the machine starts smoothly and runs reliably.

7. The lifting cloth is extracted by rubber extrusion, controlled by PLC programming, and independent lifting device.