HLDC-3200-12S Circular Loom

Equipment model: HLDC-3200-12S

Host speed: 50r/min

Host power: 11KW

Main reducer: the hard tooth surface reducer is directly connected to the motor

Number of shuttles: 12 shuttles

Track width: 125mm

Production width: 2800mm－3200mm

Weft density: 8-16 pieces/inch

Production speed: 55m/h-110m/h

Counting code meter: photoelectric meter

Number of warp yarns: maximum 3648

Warp diameter: maximum 160 mm

Weft diameter: maximum 115mm

Warp delivery device: dual frequency conversion is used to automatically track the warp delivery, and the host speed does not need to manually adjust the tension.

Breaking control: Automatic shutdown after breaking the warp

Weft breaking control: Bluetooth weft control

Oil circuit protection: automatic shutdown if the oil circuit is blocked

Sand table diameter: according to customer designation

Winder: one, direct-connected reducer with worm gear (the inverter automatically tracks the winder, and the host speed does not need to manually adjust the tension)

Winding motor: brake type

Winding width: 3200mm

Winding diameter: maximum 1500mm

Equipment size: (L) 17.1mX (W) 4.7mX (H) 6.1m

Equipment weight: about 15T

Equipment features：

1. This machine is controlled by five frequency converters, which automatically tracks the warp delivery and automatically tracks the winding. The equipment is running at a fast and slow speed, and no manual adjustment is required to make the fabric woven by the equipment smoother.

2. The number of warp yarns of this machine can reach 3648, and it can weave high-density and high-fiber container bags and geotextiles.

3. Bluetooth-type weft detector, sensitive and reliable, not affected by dust and light, safe and reliable, automatic shutdown of weft breaking and weft completion, and low defective product rate.

4. The cam adopts mandatory circulating lubrication to improve the mechanical efficiency of operation, and is equipped with an oil circuit clogging alarm device to avoid abnormal wear and tear of parts.

5. The equipment structure is reasonable and simple, with high operating reliability, few wearing parts, easy maintenance and low maintenance costs.

6. Using frequency conversion and speed regulation, the machine starts smoothly and runs reliably.

7. The lifting cloth is extracted by rubber extrusion, controlled by PLC programming, and independent lifting device.